Home Bronco TSB Summaries Recent Updates Gallery Submit A Link Unique Visitors: 367713	FORD BRONCO -> ENGINE & COOLING; swaps, specs, snorkels, vac. diagrams... -> Compression WELCOME to MIESK5's BIG BRONCO LINKS - We now have over 26,000 LINKs! This is a Ford Bronco, Truck & Van Technical & Parts LINKS site developed by the MIESK5 Family & is not affiliated with the Ford Motor Co. in any manner. Although we initially developed this site for 78-96 Big Broncos, information in many Links also applies to F, E Series & Cars. UPDATE; all Links via web.archive may be down; Copy orig. URL & go to http://replay.waybackmachine.org/ to search for the new archived copy Select A Link: Compression Ratio Calculator (head volume in CC, piston top volume, cylinder bore, crankshaft stroke, deck height & gasket height) Source: by Bowling & Grippo bgsoflex.com Cylinder Balance Test; NOTE: This test is only available on 95 Bronco w/1995 CA/MAF/SFI PCM (BIO0) & 96 Bronco; & Sequential Fuel Injection (SFI) Engines Source: by Christopher I at The Corral corral.net Cylinder Balance Test; NOTE: This test is only available on 95 Bronco w/1995 CA/MAF/SFI PCM (BIO0) & 96 Bronco; & Sequential Fuel Injection (SFI) Engines Source: by SigEpBlue (Steve) & Bronco4Life at FSB Cylinder Balance Test; NOTE: This test is only available on 95 Bronco w/1995 CA/MAF/SFI PCM (BIO0) & 96 Bronco; & Sequential Fuel Injection (SFI) Engines. Start an engine running test and press the accelerator lightly within 2 minutes after the last code is output. The PCM will cancel each cylinder in turn and measure the RPM drop. If any weak cylinders are noted their number will be output as a multiple of 10 (e.g. 30, 40). The output is the actual cylinder number, not the number in the firing order. NOTE: Will not always pinpoint bad injectors. Source: by muscularmustangs.com Vacuum Gauge Diagnosis Source: by jerickweb.50webs.com