Select A Link: |
|
"...The steel roll bar inside the factory '78-91 Bronco camper shell is glued into the fiberglass, but not bolted to the bedwalls. This is an '83 shell. All fullsize Broncos ('78-96) have a steel roll bar integrated into the rear edge of the fiberglass camper shell. In '92, the bar was improved & extended forward so it could be retained by 2 of the bolts, and the alignment pins were moved onto the bar, pointing down into the bedrails..."
Source: by Steve83 (Steve, That dirty old truck) at SuperMotors.net
|
GT Bar & Mounts pics in a 79
Source: by ? via axaviere (Truck) at SuperMotors.net
|
GT Bar Mount pics in a 79
Source: by FordTruckMan at FSB
|
GT Bar Parts Break-Out & Mounting Diagram
Source: by Steve83 (Steve, That dirty old truck) at SuperMotors.net
|
Installation in an 83
Source: by Michael C (collinsperformance, The Money Monster) at SuperMotors.net
|
Installation, Smittybilt© BR680 "Interior Tube Bar" in an 85
Source: by Chris B (Blue, bronco boy) at chrisb.users.SuperMotors.net
|
Kiddie hoop for 92-96
Source: by drvovru (Michael L) at FSB
|
pics from an 83 in a 96
Source: by jojo at SuperMotors.net
|
pics in a 94
Source: by Ken B (Kenny's 94) at SuperMotors.net
|
pics in an 80
Source: by Tony B at SuperMotors.net
|
pics in an 83
Source: by aquileus (The recycle one) at SuperMotors.net
|
pics in an 83
Source: by aquileus (The recycle one) at FSB
|
pics in an 85
Source: by cr69ml (ToyEater, Chris R) at SuperMotors.net
|
pics in an 86
Source: by Ragged_Ol_86 (Demon Spawn) at SuperMotors.net
|
Smittybilt© BR680 "Interior Tube Bar" pics in an 85
Source: by Chris B (Blue, bronco boy) at SuperMotors.netÂ
|
Sterling Equipment pics in an 88
Source: by danielzink (Dan Z) at pws.cablespeed
|